Countertop Square Footage Calculator
Add each countertop piece in inches. L-shapes are measured along the outside edges, and the corner is counted once.
How to measure
- Length: measure along the wall, from end to end where the stone will sit. Add any overhang past the cabinet end.
- Depth: standard base cabinets are 24 in deep. The countertop usually overhangs about 1 to 1.5 in, so 25 to 25.5 in is typical.
- L-shapes: measure each leg along the outside (wall side) edge, both into the corner. The calculator removes the overlap so the corner square isn't counted twice.
- Islands: include the seating overhang in the depth (often 10 to 12 in extra on the seating side).
- Cut-outs (sink, cooktop): don't subtract them. Fabricators charge for the stone they cut away.
Worked example
An L-shaped kitchen with legs of 110 in and 96 in at 25.5 in deep, plus an 84 × 42 in island:
| Piece | Math | Area |
|---|---|---|
| L-shape | 110 × 25.5 + (96 − 25.5) × 25.5 = 4,603 in² | 32.0 sq ft |
| Island | 84 × 42 = 3,528 in² | 24.5 sq ft |
| Total | 8,131 in² ÷ 144 | 56.5 sq ft |
Square footage tells you the size of the job. The number of slabs you buy depends on how the pieces fit on real slab sizes. That's what the slab calculator works out.
Questions
How many square feet is a typical kitchen countertop?
Most kitchens fall somewhere between 30 and 60 sq ft of countertop. An island alone often adds 20 to 30 sq ft. Measure your own: the range is wide.
Should I include the backsplash?
Only if it's the same stone. A 4 in stone backsplash is common; full-height backsplashes use much more stone and often need their own slab. Add it as a "Backsplash strip".
Why add extra for waste?
Slabs come in fixed sizes and pieces rarely fit perfectly, so you pay for some offcuts. Instead of guessing a waste percentage, lay your pieces out on real slab sizes with the slab calculator.
Is this a quote?
No. It's a measurement aid. A fabricator will template your cabinets on site before cutting.